CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Quantization and Noise-Shaped Coding for High Efficiency Transmitter Architectures

Ulf Gustavsson (Institutionen för mikroteknologi och nanovetenskap, Mikrovågselektronik)
Göteborg : Chalmers University of Technology, 2009. - 77 s.

Three driving parameters in the development of transmitter technologies for wireless communication today is: energy efficiency, flexibility and footprint reduction. This thesis investigates the use of 1-bit oversampled signal representation, mainly as a power efficiency enhancement technique for the transmitter, but also as a path toward reduced footprint and increased flexibility. Common transmitter architectures comprising this representation of the signal on either baseband or RF level are discussed and analyzed. Two common methods of mapping a complex baseband signal to different characteristics of a pulse-train, Pulse Width Modulation and Pulse Density Modulation are discussed. Noise-Shaped Coding, an inherent feature of Pulse Density Modulation, is illustrated and discussed. The implementation of Pulse Density Modulation and the determination of the Noise-Shaped Coding properties are explored within a class of oversampled A/D-converters commonly referred to as the ΣΔ-modulators. A few different approaches of analyzing the ΣΔ-modulator is discussed and a novel ΣΔ-modulator representation is introduced. Further on, an algorithm designed to achieve arbitrary Noise Shaped Coding by optimized selection of the loop-filter coefficients in the ΣΔ-structure is developed. This algorithm uses a Monte Carlo-based technique in combination with a differentiable approximation of the quantizer element and a damped Gauss-Newton search. Finally, a novel method for quantization noise suppression close to the RF-carrier is proposed. The method is based on the superposition of a selective amplitude variation onto the quantized signal. Simulations are performed on an equivalent baseband model comprising a generalized memory polynomial model for linearization. The method is then successfully demonstrated with measurements in a carrier bursting transmitter working on a high efficiency, 10 W Si-LDMOS power amplifier.

Nyckelord: Quantization, Pulse Density Modulation, Noise-Shaped Coding, ΣΔ-Modulators, damped Gauss-Newton, Power Amplifier, Software Defined Radio

Denna post skapades 2009-04-17. Senast ändrad 2009-08-21.
CPL Pubid: 92634


Läs direkt!

Länk till annan sajt (kan kräva inloggning)

Institutioner (Chalmers)

Institutionen för mikroteknologi och nanovetenskap, Mikrovågselektronik



Chalmers infrastruktur


Datum: 2009-05-19
Tid: 10:00
Lokal: Kollektorn, MC2
Opponent: Hans Scheck, Nokia-Siemens Networks

Ingår i serie

Technical report MC2 - Department of Microtechnology and Nanoscience, Chalmers University of Technology 146