CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Abrasive wear comparison of Cr3C2/Ni3Al composite and stellite 12 alloy cladding

H. L. Luo ; Karin Gong (Institutionen för material- och tillverkningsteknik) ; S. P. Li ; X. Cao ; Xuetao Zhang ; D. Feng ; Li Changhai (Institutionen för material- och tillverkningsteknik)
Journal of Iron and Steel Research International (1006-706X). Vol. 14 (2007), p. 15-20.
[Artikel, refereegranskad vetenskaplig]

The room-temperature abrasive wear resistance of Cr3C2/Ni3Al composite and Stellite12 alloy cladding was investigated. Three kinds of tests, designed for different load and abrasive' size, were utilized to understand the wear behaviour of these materials. Under all three wear conditions, the abrasion resistance of Cr3C2/Ni3Al composite cladding is much higher than Stellite 12 alloy. In addition, the wear-resistant advantage of Cr3C2/Ni3Al composite is more obvious when the size of the abrasive is small. The relative wear resistance of Cr3C2/Ni3Al composite increases from 2.44 times to 6 times when the size of the abrasive decreases from 180 mu m to 50 mu m. The good wear resistance of Cr3C2/Ni3Al composite cladding can be mainly attributed to the high hardness, large volume fraction of reinforcement, large reinforcement particles, and size distribution of reinforcement.

Nyckelord: Ni3Al, stellite12, chromium carbide, composity, abrasive wear, METAL-MATRIX COMPOSITES, MICROSTRUCTURE, TEMPERATURE, PERFORMANCE, NICKEL



Denna post skapades 2008-11-20. Senast ändrad 2014-02-04.
CPL Pubid: 78438

 

Läs direkt!

Lokal fulltext (fritt tillgänglig)


Institutioner (Chalmers)

Institutionen för material- och tillverkningsteknik (2005-2017)

Ämnesområden

Materialteknik

Chalmers infrastruktur