CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Statistical Evaluation of Groutability Using Data from Hydraulic Tests and Fracture Mapping Case Studies from Sweden

E. Runslätt ; Johan Thörn (Institutionen för bygg- och miljöteknik, Geologi och geoteknik) ; Åsa Fransson (Institutionen för bygg- och miljöteknik, Geologi och geoteknik) ; S. Kvartsberg
Geotechnical Special Publication (0895-0563). 288 GSP, p. 185-195. (2017)
[Konferensbidrag, refereegranskat]

Sweden has a long history of research within the field of rock fissure grouting in hard crystalline rock mass due to strict environmental requirements regarding allowable ground water draw down. These requirements normally implies that fractures down to aperture size between 50 to 100 μm needs to be sealed and within these ranges the size of the particles for cementitious grouting agents becomes a limiting factor. For a grouting design it is therefore of importance to consider the aperture size distribution of the rock mass in order to predict the groutability for both cementitious and non-cementitious grouting agents. Transmissivity data from hydraulic tests (water pressure tests) and number of fractures along a borehole can be assessed from core logging for further use as input for a statistical interpretation of fracture data to simulate an aperture size distribution. A methodology developed at Chalmers University of Technology in Gothenburg, Sweden, is proposed. The method is a statistical evaluation of groutability (SEG) and is based on the Pareto distribution. A computational design tool has been developed to simplify the use of the statistical evaluation and to make the research more accessible to end users, designers, in the grouting industry. The aim of this article is to present two case studies where the statistical interpretation of fracture data is performed by using the computational design tool and how the outcome can be of great use in finding a more accurate grouting design. The case studies include fracture data sets from two large infrastructure rock tunnel projects in Sweden; a road tunnel in Stockholm and a railroad tunnel in Gothenburg.



Denna post skapades 2017-08-04.
CPL Pubid: 250926

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för bygg- och miljöteknik, Geologi och geoteknik (2005-2017)

Ämnesområden

Geofysisk teknik

Chalmers infrastruktur