CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Validating material modelling for OFHC copper using Dynamic Tensile Extrusion (DTE) test at different velocity impact

N. Bonora ; G. Testa ; A. Ruggiero ; G. Iannitti ; Magnus Hörnqvist Colliander (Institutionen för fysik, Materialens mikrostruktur (Chalmers)) ; Seyedeh Nooshin Mortazavi (Institutionen för fysik, Materialens mikrostruktur (Chalmers))
19th Biennial American-Physical-Society (APS) Conference on Shock Compression of Condensed Matter (SCCM) (0094243X). Vol. 1793 (2017), p. 100019.
[Konferensbidrag, refereegranskat]

In the Dynamic Tensile Extrusion (DTE) test, the material is subjected to very large strain, high strain rate and elevated temperature. Numerical simulation, validated comparing with measurements obtained on soft-recovered extruded fragments, can be used to probe material response under such extreme conditions and to assess constitutive models. In this work, the results of a parametric investigation on the simulation of DTE test of annealed OFHC copper -at impact velocity ranging from 350 up to 420 m/s -using the modified Rusinek-Klepaczko model, are presented. Simulation of microstructure evolution was performed using the visco-plastic self consistent model (VPSC), providing, as input, the velocity gradient history obtained with FEM at selected locations along the axis of the fragment trapped in the extrusion die. Finally, results are compared with EBSD analysis.

Denna post skapades 2017-06-14. Senast ändrad 2017-09-01.
CPL Pubid: 249846


Läs direkt!

Lokal fulltext (fritt tillgänglig)

Länk till annan sajt (kan kräva inloggning)

Institutioner (Chalmers)

Institutionen för fysik, Materialens mikrostruktur (Chalmers)



Chalmers infrastruktur