CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Enhancement of Free Vortex Filament Method for Aerodynamic Loads on Rotor Blades

Hamidreza Abedi (Institutionen för tillämpad mekanik, Strömningslära ; Svenskt VindkraftsTekniskt Centrum (SWPTC)) ; Lars Davidson (Institutionen för tillämpad mekanik, Strömningslära ; Svenskt VindkraftsTekniskt Centrum (SWPTC)) ; Spyros Voutsinas
Journal of solar energy engineering (0199-6231). Vol. 139 (2017), 3, p. Article number 031007.
[Artikel, refereegranskad vetenskaplig]

The aerodynamics of a wind turbine is governed by the flow around the rotor, where the prediction of air loads on rotor blades in different operational conditions and its relation to rotor structural dynamics is one of the most important challenges in wind turbine rotor blade design. Because of the unsteady flow field around wind turbine blades, prediction of aerodynamic loads with high level of accuracy is difficult and increases the uncertainty of load calculations. An in-house vortex lattice free wake (VLFW) code, based on the inviscid, incompressible, and irrotational flow (potential flow), was developed to study the aerodynamic loads. Since it is based on the potential flow, it cannot be used to predict viscous phenomena such as drag and boundary layer separation. Therefore, it must be coupled to tabulated airfoil data to take the viscosity effects into account. Additionally, a dynamic approach must be introduced to modify the aerodynamic coefficients for unsteady operating conditions. This approach, which is called dynamic stall, adjusts the lift, the drag, and the moment coefficients for each blade element on the basis of the two dimensional (2D) static airfoil data together with the correction for separated flow. Two different turbines, NREL and MEXICO, are used in the simulations. Predicted normal and tangential forces using the VLFW method are compared with the blade element momentum (BEM) method, the GENUVP code, and the MEXICO wind tunnel measurements. The results show that coupling to the 2D static airfoil data improves the load and power predictions while employing the dynamic stall model to take the time-varying operating conditions into consideration is crucial.

Nyckelord: Free vortex wake model, Vortex method, Aerodynamic load, Wind turbine, MEXICO turbine, Yawed flow, Dynamic stall model, Extended ONERA model



Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2017-05-05. Senast ändrad 2017-06-14.
CPL Pubid: 249148

 

Läs direkt!

Lokal fulltext (fritt tillgänglig)

Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Strömningslära (2005-2017)
Svenskt VindkraftsTekniskt Centrum (SWPTC)

Ämnesområden

Energi
Materialvetenskap
Hållbar utveckling
Strömningsmekanik

Chalmers infrastruktur