CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Pressure drop in dairy evaporators: Experimental study and friction factor modelling

Ernesto Mura (Institutionen för energi och miljö, Industriella energisystem och -tekniker ) ; Mathias Gourdon (Institutionen för energi och miljö, Industriella energisystem och -tekniker )
Journal of Food Engineering (0260-8774). Vol. 195 (2017), p. 128-136.
[Artikel, refereegranskad vetenskaplig]

The pressure drop that occurs during the falling film evaporation of dairy products is related to the downward co-flowing vapour and directly affects the saturation temperature of the product, resulting in a non-constant thermal driving force of the process along the evaporator. Frictional forces are the major contributor to the pressure drop, and the friction factor is a crucial parameter in reliably estimating the pressure drop. In the present study, the absolute vapour flow pressure losses during falling film evaporation of dairy products were measured using an experimental internal tube evaporator set-up. To simulate real industrial conditions, experiments were conducted by varying the co-flow inlet velocity (from 0 to 37 ms(-1)) over a wide range of product dry solid content DC (from DC = 0%-50%). Results obtained at DC = 0% show that the experimental approach is consistent when measurements are compared to the well-known Wallis correlation. A large number of experimental data has been obtained for DC between 13 and 40% for which the pressure losses have a strong dependence from the co-flowing vapour rate; in some specific cases, the influence of the surface bubbling phenomena has been put in evidence. The presented results, have been used to calibrate a new accurate correlation for the friction factor (4f(tv)) coefficient showing a squared residual of R-2 = 0.93.

Nyckelord: Drying process, Falling film, Annular two-phase flow, Vapour pressure losses, falling-film evaporation, heat-transfer, annular-flow, Engineering, Food Science & Technology, isholm d, 1973, international journal of heat and mass transfer, v16, p347

Denna post skapades 2017-01-13.
CPL Pubid: 246848


Läs direkt!

Länk till annan sajt (kan kräva inloggning)

Institutioner (Chalmers)

Institutionen för energi och miljö, Industriella energisystem och -tekniker (2015-2017)


Hållbar utveckling

Chalmers infrastruktur