CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

The Study of Local Effect of Manganese on Microstructure Development of Admixed Fe-Mn-C Sintered Steels

R. Bidulsky ; Eduard Hryha (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik) ; J. Bidulska
High Temperature Materials and Processes (0334-6455). Vol. 35 (2015), 9, p. 865-870.
[Artikel, refereegranskad vetenskaplig]

The present paper is focused on the effect of manganese on microstructure development of admixed Fe-Mn-C sintered steels along with diffusion characteristics of manganese in the iron matrix. Admixed systems were prepared on the base of sponge iron powder, with addition of 0.3% C and 3% Mn added as ferromanganese. Sintering at 1,023, 1,173, 1,323, 1,423 and 1,473 K for 180 s was carried out in laboratory tube furnace in an atmosphere of pure gases mixture 25% N-2 + 75% H-2 with the dew point of 243 K. The results show that admixed sintered manganese steels exhibit heterogeneity of microstructure due to the local chemical heterogeneities of these materials, in particular for those areas with a high manganese concentration. On the basis of calculation of manganese apparent diffusion coefficient and penetration depth, results reveal that diffusion-induced grain boundary migration (DIGM) is the dominant alloying mechanism in sintered manganese steels.

Nyckelord: sintered steels, microstructure, DIGM, diffusion coefficient



Denna post skapades 2016-12-05. Senast ändrad 2017-05-30.
CPL Pubid: 245826

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik (2005-2017)

Ämnesområden

Materialkemi

Chalmers infrastruktur