CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Bobbin and conventional friction stir welding of thick extruded AA6005-T6 profiles

Mohsen Esmaily (Institutionen för kemi och kemiteknik, Oorganisk miljökemi) ; Seyedeh Nooshin Mortazavi (Institutionen för fysik, Materialens mikrostruktur (Chalmers)) ; W. Osikowicz ; H. Hindsefelt ; Jan-Erik Svensson (Institutionen för kemi och kemiteknik, Oorganisk miljökemi) ; Mats Halvarsson (Institutionen för fysik, Materialens mikrostruktur (Chalmers)) ; J. Martin ; Lars-Gunnar Johansson (Institutionen för kemi och kemiteknik, Oorganisk miljökemi)
Materials & design (0264-1275). Vol. 108 (2016), p. 114-125.
[Artikel, refereegranskad vetenskaplig]

Conventional and bobbin friction stir welding processes (FSW and BFSW, respectively) were employed for joining 10 mm thick extruded AA6005-T6 profiles. The FSW and BFSW techniques were employed using two sets of parameters resulting in slow and fast processes. In general, the bobbin tool enabled welding with faster welding speeds than the conventional FSW technique. A comprehensive in-situ thermal analysis was performed using thermocouples. It was evident that, in a like-for-like comparison, i.e., employing the same set of welding parameters, the BFSW technique introduces a somewhat higher peak temperature, however, lower heat input and, more importantly, a higher cooling rate than the conventional FSW. Accordingly, a somewhat finer microstructure was formed in the stir zone of the BFSW samples than in the FSW ones, resulting in higher hardness values, and slightly higher ultimate strengths in the BFSW samples.

Nyckelord: Friction stir welding, Bobbin tool, Microstructure, Mechanical properties

Denna post skapades 2016-10-14. Senast ändrad 2017-10-03.
CPL Pubid: 243412


Läs direkt!

Länk till annan sajt (kan kräva inloggning)