CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Characterizing BEV Powertrain Energy Consumption, Efficiency, and Range During Official and Drive Cycles From Gothenburg, Sweden

Emma Grunditz (Institutionen för energi och miljö, Elteknik) ; Torbjörn Thiringer (Institutionen för energi och miljö, Elteknik)
IEEE Transactions on Vehicular Technology (0018-9545). Vol. 65 (2015), 6, p. 3964 - 3980 .
[Artikel, refereegranskad vetenskaplig]

In this paper, the energy consumption per distance of a battery electric vehicle (BEV) is comprehensively investigated for various official and gathered real-world drive cycles, including the powertrain's cycle average efficiency. The powertrain component losses are modeled with a high level of detail, and they are functions of both speed and load. It is shown that the difference in calculated drive-cycle energy consumption may be up to 16% when using two different acceleration approximation methods and one speed sample per second, which is an interval commonly used among drive cycles. In contrast to combustion engine vehicles (CEVs), BEV energy consumption per distance generally increases with increasing cycle speed levels, and time spent at high speed levels have the largest influence on the consumption. The effect of acceleration on energy consumption is seen to be considerably reduced due to regenerative braking as it reduces the consumption by up to 49% on an acceleration intense cycle. Even when the regenerative area is limited to about half, the decrease in driving range is less than 1% for most cycles. By introducing the concept of overconsumption, it is shown that much time spent at high levels of acceleration is one of the largest contributors to excess energy consumption for BEVs. Furthermore, the found cycle average powertrain efficiencies are quite similar between the different cycles, with 82%–90% during propulsion and only slightly lower during braking, i.e., much less speed dependent than for CEVs.

Nyckelord: Drive cycle, Driving Pattern Parameters, Efficiency, Electric vehicles, Energy Consumption, Modeling, Range, Real World Drive Cycle, Simulation



Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2016-06-27. Senast ändrad 2016-09-07.
CPL Pubid: 238387

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för energi och miljö, Elteknik

Ämnesområden

Building Futures
Energi
Transport
Hållbar utveckling
Elkraftteknik

Chalmers infrastruktur