CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Calibration of the WALLTURB experiment hot wire rake with help of PIV

M. Stanislas ; J. M. Foucaut ; S. Coudert ; M. Tutkun ; William K. George (Institutionen för tillämpad mekanik, Strömningslära) ; J. Delville
International Workshop on Understanding and Modelling of Wall Turbulence, 2009, Lille, France, 21-23 April (13824309 ). Vol. 14 (2011), p. 75-84.
[Konferensbidrag, refereegranskat]

In the WALLTURB LML experiment presented in Delville et al. (Stanislas, M., Jimenez, J., Marusic, I. (eds.) Progress in Wall Turbulence: Understanding and Modeling. Proceedings of the WALLTURB International Workshop Held in Lille, France, April 21–23, 2009. ERCOFTAC Series, vol. 14. Springer, Dordrecht, 2011), the calibration of the hot wire rake had to be performed on site, due to the large number of wires on the rake (143). For that purpose, the position of the wires with respect to the wall was carefully measured using two complementary techniques. The blockage effect due to the rake was characterized using StereoPIV and modeled using a simple potential flow model. The results show that the blockage affects mostly the mean flow and not the turbulence itself. Finally, the calibration data were built using the StereoPIV data in a plane located 1 cm upstream of the wires plane. The mean velocity, the second and third moments were provided. The calibration was checked on the fourth moment of the fluctuating velocity. © Springer Science+Business Media B.V. 2011.



Denna post skapades 2016-06-13.
CPL Pubid: 237646

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Strömningslära

Ämnesområden

Strömningsmekanik och akustik

Chalmers infrastruktur