CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Properties, performance and associated hazards of state-of-the-art durable water repellent (DWR) chemistry for textile finishing

Hanna Holmquist (Institutionen för kemi och kemiteknik, Kemisk miljövetenskap) ; Steffen Schellenberger ; Ike van der Veen ; Gregory Peters (Institutionen för kemi och kemiteknik, Kemisk miljövetenskap) ; Pim Leonards ; Ian Cousins
Environment International (0160-4120). Vol. 91 (2016), p. 251-264.
[Artikel, refereegranskad vetenskaplig]

Following the phase-out of long-chain per- and polyfluoroalkyl substances (PFASs), the textile industry had to find alternatives for side-chain fluorinated polymer based durable water repellent (DWR) chemistries that incorporated long perfluoroalkyl side chains. This phase-out and subsequent substitution with alternatives has resulted in a market where both fluorinated and non-fluorinated DWRs are available. These DWR alternatives can be divided into four broad groups that reflect their basic chemistry: side-chain fluorinated polymers, silicones, hydrocarbons and other chemistries (includes dendrimer and inorganic nanoparticle chemistries). In this critical review, the alternative DWRs are assessed with regards to their structural properties and connected performance, loss and degradation processes resulting in diffuse environmental emissions, and hazard profiles for selected emitted substances. Our review shows that there are large differences in performance between the alternative DWRs, most importantly the lack of oil repellence of non-fluorinated alternatives. It also shows that for all alternatives, impurities and/or degradation products of the DWR chemistries are diffusively emitted to the environment. Our hazard ranking suggests that hydrocarbon based DWR is the most environmentally benign, followed by silicone and side-chain fluorinated polymer-based DWR chemistries. Industrial commitments to reduce the levels of impurities in silicone based and side-chain fluorinated polymer based DWR formulations will lower the actual risks. There is a lack of information on the hazards associated with DWRs, in particular for the dendrimer and inorganic nanoparticle chemistries, and these data gaps must be filled. Until environmentally safe alternatives, which provide the required performance, are available our recommendation is to choose DWR chemistry on a case-by-case basis, always weighing the benefits connected to increased performance against the risks to the environment and human health.

Nyckelord: Hazard assessment; Per- and polyfluoroalkyl substances; PFAS; Silicones; Wax; Dendrimers

Denna post skapades 2016-03-22. Senast ändrad 2016-06-17.
CPL Pubid: 233527


Läs direkt!

Länk till annan sajt (kan kräva inloggning)