# wo-equation hybrid RANS-LES Models: A novel way to treat k and omega at the inlet

**Lars Davidson
** (Institutionen för tillämpad mekanik, Strömningslära)
**THMT-15: Turbulence, Heat and Mass Transfer 8** (2015)

[Konferensbidrag, refereegranskat]

A novel method for prescribing inlet conditions for $k$ and $\omega$ is presented and evaluated. The method is based on the proposal by Hamda to use commutation terms at RANS-LES
interfaces. Commutation terms are added in the region near the inlet (i.e. the RANS-LES interface) in the k and omega equations. It is found that it is preferable to add the commutation terms only in the cells adjacent to the inlet.
The commutation term in the k equation this term corresponds to a convection term where k is reduced from its RANS value to zero over one cell layer.
Anisotropic synthetic fluctuations are used in the momentum equations as inlet conditions. The mean velocity, k, omega and the Reynolds shear stress profile are taken from a pre-cursor RANS simulation. The anisotropy of the synthetic fluctuations is defined from the EARSM model. No tuned constants are used.

(öppna i nytt fönster)

**Det verkar som att din webbläsare saknar möjlighet att visa PDF. Klicka Öppna i nytt fönster för att läsa.**

### Länka till denna publikation

### Dela på webben

### Skapa referens, olika format (klipp och klistra)

**Harvard**

Davidson, L. (2015) *wo-equation hybrid RANS-LES Models: A novel way to treat k and omega at the inlet*.

** BibTeX **

@conference{

Davidson2015,

author={Davidson, Lars},

title={wo-equation hybrid RANS-LES Models: A novel way to treat k and omega at the inlet},

booktitle={THMT-15: Turbulence, Heat and Mass Transfer 8},

abstract={A novel method for prescribing inlet conditions for $k$ and $\omega$ is presented and evaluated. The method is based on the proposal by Hamda to use commutation terms at RANS-LES
interfaces. Commutation terms are added in the region near the inlet (i.e. the RANS-LES interface) in the k and omega equations. It is found that it is preferable to add the commutation terms only in the cells adjacent to the inlet.
The commutation term in the k equation this term corresponds to a convection term where k is reduced from its RANS value to zero over one cell layer.
Anisotropic synthetic fluctuations are used in the momentum equations as inlet conditions. The mean velocity, k, omega and the Reynolds shear stress profile are taken from a pre-cursor RANS simulation. The anisotropy of the synthetic fluctuations is defined from the EARSM model. No tuned constants are used.
},

year={2015},

}

** RefWorks **

RT Conference Proceedings

SR Electronic

ID 231609

A1 Davidson, Lars

T1 wo-equation hybrid RANS-LES Models: A novel way to treat k and omega at the inlet

YR 2015

T2 THMT-15: Turbulence, Heat and Mass Transfer 8

AB A novel method for prescribing inlet conditions for $k$ and $\omega$ is presented and evaluated. The method is based on the proposal by Hamda to use commutation terms at RANS-LES
interfaces. Commutation terms are added in the region near the inlet (i.e. the RANS-LES interface) in the k and omega equations. It is found that it is preferable to add the commutation terms only in the cells adjacent to the inlet.
The commutation term in the k equation this term corresponds to a convection term where k is reduced from its RANS value to zero over one cell layer.
Anisotropic synthetic fluctuations are used in the momentum equations as inlet conditions. The mean velocity, k, omega and the Reynolds shear stress profile are taken from a pre-cursor RANS simulation. The anisotropy of the synthetic fluctuations is defined from the EARSM model. No tuned constants are used.

LA eng

LK http://www.tfd.chalmers.se/~lada/postscript_files/paper-thmt15.pdf

OL 30

Denna post skapades 2016-02-03.

CPL Pubid: 231609