CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

A Comparison of Heat Transfer and Spray Characteristics for a Model Fuel and Standard Diesel Interacting with a Temperature-Controlled Wall

Alf Magnusson (Institutionen för tillämpad mekanik, Förbränning och Flerfasströmning) ; Stanislaw Jedrzejowski ; Sven Andersson (Institutionen för tillämpad mekanik)
Thiesel 2006 (2006)
[Konferensbidrag, refereegranskat]

The objective of this work is to compare the heat transfer and liquid penetration of two different diesel fuels when they impinge on a temperature-controlled wall. The study was performed in a high pressure, high temperature spray rig at conditions corresponding to a direct injected diesel engine. Two fuels were used in this study, a standard diesel fuel and a two-component model fuel. The temperature-controlled wall on which the fuel impinged was mounted at different distances downstream of the nozzle in the spray chamber. It was equipped with four coaxial thermocouples for recording the surface temperature. The thermocouples had a vacuum deposited junction that offered a response time of approximately \unit{3}{\micro\second}. Recorded time histories of the surface temperatures showed that the two fuels have a similar heat transfer at two different wall temperatures. It could also be seen that wall and air temperature had a great influence on the heat transfer. The spray characteristics were measured with a Phase Doppler Particle Analyzer and high speed imaging. Image analysis showed that the two fuels have a similar penetration even though both methods showed that the model fuel, Idea, evaporates faster. PDPA data show that the axial mean velocity behaves the same close to the spray centre but changes further out. The radial (mode) velocities are mainly dependant on height position for both fuels. The droplet diameter is larger for the diesel fuel at all positions, probably because of a stronger evaporation of the model fuel.



Denna post skapades 2007-01-09. Senast ändrad 2014-09-29.
CPL Pubid: 22712

 

Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Förbränning och Flerfasströmning (2005-2006)
Institutionen för tillämpad mekanik (1900-2017)

Ämnesområden

Teknisk mekanik

Chalmers infrastruktur

Relaterade publikationer

Denna publikation ingår i:


Spray-Wall Interaction of Diesel Sprays