CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Evaporation of lignin-lean black liquor

H. Wallmo ; U. Andersson ; Mathias Gourdon (Institutionen för energi och miljö, Industriella energisystem och -tekniker ) ; M. Wimby
TAPPI Journal (0734-1415). Vol. 14 (2015), 7, p. 441-450.
[Artikel, refereegranskad vetenskaplig]

Many of the pulp mill biorefinery concepts recently presented include removal of lignin from black liquor. In this work, the aim was to study how the change in liquor chemistry affected the evaporation of kraft black liquor when lignin was removed using the LignoBoost process. Lignin was removed from a softwood kraft black liquor and four different black liquors were studied: one reference black liquor (with no lignin extracted); two ligninlean black liquors with a lignin removal rate of 5.5% and 21%, respectively; and one liquor with maximum lignin removal of 60%. Evaporation tests were carried out at the research evaporator in Chalmers University of Technology. Studied parameters were liquor viscosity, boiling point rise, heat transfer coefficient, scaling propensity, changes in liquor chemical composition, and tube incrustation. It was found that the solubility limit for incrustation changed towards lower dry solids for the lignin-lean black liquors due to an increased salt content. The scaling obtained on the tubes was easily cleaned with thin liquor at 105°C. It was also shown that the liquor viscosity decreased exponentially with increased lignin outtake and hence, the heat transfer coefficient increased with increased lignin outtake. Long term tests, operated about 6 percentage dry solids units above the solubility limit for incrustation for all liquors, showed that the heat transfer coefficient increased from 650 W/m2K for the reference liquor to 1500 W/m2K for the liquor with highest lignin separation degree, 60%. Application: This study can be used to help assess the consequences for an evaporation plant concerning both changes in capacity and risk for fouling when evaluating a biorefinery concept, including lignin removal, at a mill. It also adds novel information to the research work on black liquor evaporation. Application: This study can be used to help assess the consequences for an evaporation plant concerning both changes in capacity and risk for fouling when evaluating a biorefinery concept, including lignin removal, at a mill. It also adds novel information to the research work on black liquor evaporation.



Denna post skapades 2015-08-27. Senast ändrad 2015-09-04.
CPL Pubid: 221292

 

Institutioner (Chalmers)

Institutionen för energi och miljö, Industriella energisystem och -tekniker (2015-2017)

Ämnesområden

Pappers-, massa- och fiberteknik

Chalmers infrastruktur