CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Short rolling contact fatigue and thermal cracks under frictional rolling - A comparison through simulations

Sara Caprioli (Institutionen för tillämpad mekanik, Dynamik)
Engineering Fracture Mechanics (0013-7944). Vol. 141 (2015), p. 260-273.
[Artikel, refereegranskad vetenskaplig]

The relative severity of radial (thermal) and inclined rolling contact fatigue surface cracks of equal depth in a railway wheel is investigated by three-dimensional elastoplastic finite element analyses of a cracked wheel sector subjected to contact loading. Response is quantified by relative displacements of nodes close to crack tip and at the crack mouth. Highly inclined cracks give the highest magnitudes of crack tip shear displacements, which is the dominant deformation mode. Braking conditions are found to open the crack mouth. Initially higher temperatures on thermal cracks cause increased crack tip deformation and opening of the crack, whereafter subsequent mechanical load cycles impose crack closure.

Nyckelord: Crack tip displacement , Elastoplastic finite element simulations , Railway wheel , Rolling contact fatigue crack , Thermal crack



Denna post skapades 2015-06-29. Senast ändrad 2015-07-10.
CPL Pubid: 219048

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Dynamik

Ämnesområden

Teknisk mekanik
Farkostteknik

Chalmers infrastruktur