CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

A representative linear eddy model (RILEM) for non-premixed combustion

Tim Lackmann (Institutionen för tillämpad mekanik, Förbränning) ; Alan Kerstein ; Michael Oevermann (Institutionen för tillämpad mekanik, Förbränning)
SAE Technical Paper: SAE 2015 World Congress and Exhibition; Cobo CenterDetroit; United States; 21 April 2015 through 23 April 2015 (2015)
[Konferensbidrag, refereegranskat]

To further improve the efficiency and emissions profiles of internal combustion engines, many new combustion concepts are currently being investigated. Examples include homogeneous charge compression ignition (HCCI), stratified charge compression ignition (SCCI), lean stratified premixed combustion, and the use of high levels of exhaust gas recirculation (EGR) in diesel engines. The typical combustion temperatures in all of these concepts are lower than those in traditional spark ignition or diesel engines.

Most of the combustion models that are currently used in computational fluid dynamics (CFD) simulations were developed to describe either premixed or non-premixed combustion under the assumption of fast chemistry. The refinement of existing combustion concepts for highly efficient clean engines and the development of new ones would be greatly facilitated by the introduction of new computational tools and combustion models that are mode- and regime-independent, i.e. capable of modeling both premixed and non-premixed and also fast and non-fast chemistry. Such tools should enable more accurate simulation of combustion under non-standard conditions such as those established during low temperature combustion.

This paper presents a new regime-independent combustion modeling strategy for non-premixed combustion in which the linear eddy model (LEM) is used as a representative interactive regime-independent turbulent combustion model and coupled to a 3D CFD solver. Parameters and boundary conditions that determine the evolution of the LEM are supplied by the 3D CFD calculation and updated at each time step. The LEM is then solved for the corresponding time step, providing the 3D CFD code with an updated composition state.

This new representative interactive linear eddy model (RILEM) is used to simulate an n-heptane spray, demonstrating some potential to describe spray combustion processes.

Denna post skapades 2015-05-29. Senast ändrad 2016-10-06.
CPL Pubid: 217778


Läs direkt!

Lokal fulltext (fritt tillgänglig)

Länk till annan sajt (kan kräva inloggning)

Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Förbränning (2007-2017)


Termisk energiteknik

Chalmers infrastruktur