CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Nyquist Stability Analysis of a VSC-HVDC System with a Distributed Parameter DC-cable Model

Yujiao Song (Institutionen för signaler och system, Reglerteknik)
Göteborg : Chalmers University of Technology, 2015. - 91 s.
[Licentiatavhandling]

Voltage source converter based high voltage direct current (VSC-HVDC) transmission systems have now been in operation since 1997 as it is a reliable and flexible method of power transmission. This thesis focuses on small signal dynamics of such systems, emphasizing stability properties. When modeling such systems, the DC-cable is most often approximated by a single Π-section and there are questions if this is accurate enough to decide on if a certain VSC-HVDC system is stable or not. To be independent of this approximation, we propose the use of a distributed parameter cable model, based on the damped wave equation. Under assumption of strong grid AC environment, the VSC-HVDC system with distributed parameter DC cable model can be described by two cascaded blocks. The first block is a transfer function that will be different, due to which input and output variables that are considered but is in all realistic cases stable. The second block is a feedback loop, where the forward path is a rational function and the return path is a dissipative infinite dimensional function, that remains the same in all cases. The stability is then analyzed using the Nyquist criterion in a straight forward manner. The stability analysis of two terminal VSC-HVDC systems embedded in a weak AC-grid can be separated into two parts: the active power controlled VSC and the VSC-HVDC system while the active power controlled VSC is under steady state. The stability of the first part is analyzed by the small gain theorem. The second part is analyzed by the Nyquist criterion. Similar to the strong AC-grid case, the system can be described by two cascaded blocks. The first block is a transfer function and the second block is a feedback loop. Note that all blocks, however, will be a bit more complicated than in the strong AC-grid case. One example is given, showing that the VSC-HVDC system with a single Π-section cable model is sufficient to prove system stability, independently of the DC-cable length and impedance density.

Nyckelord: Electric power transmission, VSC-HVDC system, Distributed parameter cable model, Nyquist stability analysis, Weak AC-grid, Small gain theorem.



Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2015-05-06. Senast ändrad 2015-12-17.
CPL Pubid: 216566

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för signaler och system, Reglerteknik (2005-2017)

Ämnesområden

Energi
Elektroteknik och elektronik

Chalmers infrastruktur

Relaterade publikationer

Inkluderade delarbeten:


Nyquist stability analysis of a VSC-HVDC system using a distributed parameter DC-cable model


Examination

Datum: 2015-06-04
Tid: 10:00
Lokal: Room EB, Hörsalsvägen 11, Campus Johanneberg
Opponent: Henrik Sandberg, Associate Professor, Department of Automatic Control, KTH, Stockholm

Ingår i serie

R - Department of Signals and Systems, Chalmers University of Technology