CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

RECYCLING BY MELT-PROCESSING OF TERNARY PLASTIC BLENDS RELATED TO THE COMPOSITION OF ELECTRONIC WASTE PLASTICS

Erik Stenvall (Institutionen för material- och tillverkningsteknik, Polymera material och kompositer) ; Antal Boldizar (Institutionen för material- och tillverkningsteknik, Polymera material och kompositer) ; Mark Foreman (Institutionen för kemi- och bioteknik, Kärnkemi) ; Sandra Tostar (Institutionen för kemi- och bioteknik, Industriell materialåtervinning)
Proceedings of the Polymer Processing Society 29th Annual Meeting PPS-29, (2013)
[Konferensbidrag, refereegranskat]

A recyclable plastics waste stream of electrical and electronic equipment has previously been found to contain acrylonitrile-butadiene-styrene copolymer (ABS, ~40 wt%), high impact polystyrene (HIPS, ~40 wt%), polypropylene (PP, ~10 wt%) and a rest fraction consisting mainly of other styrene-based thermoplastics. In this work, one virgin and one recycled ternary blend consisting of these three components were melt-blended in an extruder to study the influence of processing conditions on the mechanical and thermal properties. Favourable processing conditions with respect to tensile properties of the virgin blend were found at intermediate screw rotations (40-80 rpm) and relatively low barrel temperatures (170-220 oC). The recycled blend and recycled ABS, HIPS and PP showed higher stiffness and yield stress, but lower elongation at break than the corresponding virgin materials. The stiffness and yield stress of the blends were found mainly to follow the rule of mixtures of their components while the elongation at break exhibited adverse characteristics indicating incompatibility between ABS, HIPS and PP. Differential scanning calorimetry showed an additional melt peak for the recycled blend compared to the virgin blend, otherwise the transitions were similar. The additional peak could be assigned to polyethylene in the PP component. The onset of the thermo-oxidative degradation was found to be at almost 190 oC in the case of the recycled blend, which was high considering that it was close to that of the virgin blend and higher than expected from the rule of mixtures of the recycled components.

Nyckelord: WEEE, plastics recycling, melt-blending, processing conditions



Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2015-02-20. Senast ändrad 2015-07-28.
CPL Pubid: 212883

 

Institutioner (Chalmers)

Institutionen för material- och tillverkningsteknik, Polymera material och kompositer
Institutionen för kemi- och bioteknik, Kärnkemi (2005-2014)
Institutionen för kemi- och bioteknik, Industriell materialåtervinning (2007-2014)

Ämnesområden

Materialvetenskap
Polymerkemi
Textil-, gummi- och polymermaterial

Chalmers infrastruktur