CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Poromechanical Modeling of Composites Manufacturing

Mohammad Rouhi (Institutionen för tillämpad mekanik, Material- och beräkningsmekanik)
Göteborg : Chalmers University of Technology, 2015. ISBN: 978-91-7597-144-5.- 128 s.
[Doktorsavhandling]

Fibre reinforced composite materials are used extensively in today's industry. On one hand, the low-weight feature of this kind of material gives important advantages such as lower fuel consumption and lower amount of CO2 emissions. On the other hand, corrosion and high temperature resistance has made them suitable for different type of environments. Composite materials are also assumed to grow significantly in automotive industry in near future. In these perspectives, especial attention has risen up towards development of advanced manufacturing technologies where higher production rate, lower cost and lower environmental issues are desired. To achieve this goal, numerical simulations and CAE tools are employed to predict the behavior of manufacturing methods with respect to the process optimization and the product properties. The focus of this research thesis is toward development of a framework for holistic modeling of fiber reinforced composites manufacturing. The manufacturing process can be considered as a fluid filled porous material, which can be described, on macro scale as well as micro scale, by the Theory of Porous Media (TPM). The TPM has been further enhanced by introducing the concept of phase compressibility of the biphasic mixture of solid and fluid, in order to describe the physical sub-processes happening in different scale. The model of the considered problem is then put forward to be solved by Finite Element Method (FEM). In the discretization of the numerical domain a quadratic six-node triangular element is used and a staggered solution procedure is chosen to solve the highly coupled problem in a finite strain regime. The most important challenges, that the numerical solution procedure is able to capture, are (1) modeling the compressible volumetrically-deformable fiber preform and the shape of membrane due to the different considered loading situations (2) the dual scale resin flow motion through the fibrous preform and the compaction of individual plies (3) deformation dependent permeability models (4) the free surface problem when the flow is moving with respect to a flow front velocity into the vacuum zone of the porous material. The framework that is developed here is capable of simulating different manufacturing processes based on the chosen initial conditions, boundary conditions and material parameters. Liquid Composite Molding (LCM), Liquid Resin Infusion (LRI), Resin Transfer Molding (RTM), Out of Autoclave (OoA), press forming prepregs, Engineering Vacuum Channels (EvaC) and similar manufacturing methods are some examples of the processes that have been simulated.

Nyckelord: Poromechanics, Finite element Analysis (FEA), Manufacturing Technologies, Polymer Composites


The PhD thesis is conducted, partly in time, at the Swedish research institute of composites material, Swerea SICOMP, between Feb 2012 - Feb 2015



Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2015-01-13. Senast ändrad 2015-02-02.
CPL Pubid: 210632

 

Läs direkt!

Lokal fulltext (fritt tillgänglig)


Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Material- och beräkningsmekanik (2005-2017)

Ämnesområden

Materialvetenskap
Fastkroppsmekanik
Kompositmaterial och -teknik

Chalmers infrastruktur

C3SE/SNIC (Chalmers Centre for Computational Science and Engineering)

Relaterade publikationer

Inkluderade delarbeten:


Free surface flow and preform deformation in composites manufacturing based on porous media theory


Modeling of coupled dual-scale flow–deformation processes in composites manufacturing


Experimental assessment of coupled dual-scale flow-deformation processes in composites manufacturing


Holistic modeling of composites manufacturing using poromechanics


Examination

Datum: 2015-02-25
Tid: 10:00
Lokal: Virtual Development Laboratory (VDL), Hörsalsvägen 7A, Chalmers University of Technology, Gothenburg, Sweden
Opponent: Professor Sylvain Drapier, Department of Mechanics and Materials Processing, Ecole des Mines Saint-Etienne, France

Ingår i serie

Doktorsavhandlingar vid Chalmers tekniska högskola. Ny serie 3825