CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Optimus Pråm - Semi-submersible wind farm installation vessel for Blekinge Offshore

Marine Design Project 2014 - Group 1

Christoffer Ahlström ; Alexander Andersson ; Niklas Blomgren ; Dominik Büchel ; Chi Chen ; Lisa Dahlström (Institutionen för bygg- och miljöteknik, Geologi och geoteknik) ; Youmin Huang ; Daniel Karlsson ; Surya Kiran Pervali ; Kadir Burak Korkmaz ; Adam Olsson ; Matej Prevc ; Jennifer Ringsby (Institutionen för bygg- och miljöteknik, Vatten Miljö Teknik) ; Rioshar Yarveisy ; Qiajian Ye ; Nicklas Åkerlund
Göteborg : Chalmers University of Technology, 2014. - 134 s.

In Sweden the government is investing lots of resources in order to meet the energy need with clean and renewable alternatives. Since wind is an unlimited source of energy the exploitations of wind farms is of great interest. This report describes a conceptual design of an innovative offshore wind turbine installation vessel for inland sea conditions, with highest possible energy efficiency and environmental friendly performance in every detail. The customer, Blekinge Offshore, main requirement is to receive a concept with an as low installation cost as possible. The final concept Optimus Pråm includes one installation vessel, which is a semi-submersible barge, and one support vessel that supply the installation vessel with power and propulsion. The power is distributed from the support vessel to the installation vessel through a power cable. The installation vessel will be self-propelled during the installation phase using electrical motors and thrusters. The installation vessel shall be able to handle gravity foundations and fully assembled wind turbines, transported vertically to the installation site. Foundations and windmills will be fully assembled in Karlshamn port before transit to site. During transit the installation and support vessel are connected to each other in all motions except pitch. This almost total fixed connection makes the two vessels acts like one, which gives the joint vessel excellent manoeuvrability. When installing foundations, the installation vessel and the support vessel disconnect. The installation vessel places the foundation at the planned location by ballasting until the foundation has reached the seabed. After de-ballasting the installation vessel and support vessel connects again and transit back to the harbour. When installing wind turbines the two vessels are kept connected and makes highly accurate positioning for the installation possible

Nyckelord: Semi-submersible, Offshore installation, Wind turbine, Gravity foundation, Ballast, Offshore Wind farm, Baltic Sea, Lifting appliances, Push barge

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2014-12-19. Senast ändrad 2015-02-05.
CPL Pubid: 208702


Läs direkt!

Lokal fulltext (fritt tillgänglig)

Institutioner (Chalmers)

Institutionen för bygg- och miljöteknik, Geologi och geoteknik (2005-2017)
Institutionen för bygg- och miljöteknik, Vatten Miljö Teknik (2005-2017)


Hållbar utveckling

Chalmers infrastruktur

Relaterade publikationer

Inkluderade delarbeten:

Optimus Pråm - Semi-submersible wind farm installation vessel for Blekinge Offshore

Denna publikation ingår i:

Optimus Pråm - Semi-submersible wind farm installation vessel for Blekinge Offshore