CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Pretreatment methods for gasification of biomass and Fischer-Tropsch crude production integrated with a pulp and paper mill

Johan Isaksson (Institutionen för energi och miljö, Värmeteknik och maskinlära) ; Anders Åsblad ; Thore Berntsson (Institutionen för energi och miljö, Värmeteknik och maskinlära)
Clean Technologies and Environmental Policy (1618-954X). Vol. 16 (2014), 7, p. 1393-1402.
[Artikel, refereegranskad vetenskaplig]

In this paper, the influence on the system performance and greenhouse gas (GHG) emissions of different biomass pretreatment methods before gasification and Fischer–Tropsch (FT) crude production was evaluated. Entrained flow gasification has the benefit of producing a practically tar-free synthesis gas with nearly complete carbon conversion. This gasifier type requires a relatively dry fuel, with small particle size, at high pressure. The size can be acquired by milling, which is energy intensive and feeding is challenging. Torrefaction of biomass facilitates milling; it thus requires less electricity, however, the torrefaction process requires heat. Pyrolysis decomposes the biomass into gaseous, liquid, and solid parts, respectively. This further makes feeding easier, but comes with a greater heat demand than torrefaction. The impact of the different pretreatment methods on the overall energy system has been evaluated using process integration methodology. The results show that the excess heat from an FT process with a biomass input of 300 MWHHV can replace the bark boiler in a large chemical pulp and paper mill, producing 350,000 tonnes of bleached paperboard annually. With the preconditions given for this study, thermal pretreatment of biomass may be beneficial in terms of wood-to-FT crude efficiency, with efficiencies up to 68 %, assuming 40 % electrical efficiency. Pretreatment using pyrolysis performed the best in regards to GHG emissions, if CO2 from acid gas removal was vented, while milling, with an annual reduction of around 700,000 tonnes of CO2,eq, had the best results if the CO2 was captured and sequestrated.

Nyckelord: pretreatment, torrefaction, pyrolysis, biomass gasification, heat integration

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2014-09-15. Senast ändrad 2014-09-29.
CPL Pubid: 202748


Institutioner (Chalmers)

Institutionen för energi och miljö, Värmeteknik och maskinlära (2005-2014)


Hållbar utveckling
Termisk energiteknik

Chalmers infrastruktur

Relaterade publikationer

Denna publikation ingår i:

Biomass Gasification-Based Biorefineries in Pulp and Paper Mills – Greenhouse Gas Emission Implications and Economic Performance