CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Moisture Conditions in Exterior Wooden Walls and Timber During Production and Use

Lars Olsson (Institutionen för bygg- och miljöteknik)
Göteborg : Chalmers University of Technology, 2014. - 101 s.

Thermal insulation of building envelopes has improved over the years. This means that building envelope have become more susceptible to defects, with an increased risk of moisture damage. The criteria for energy consumption have become more rigorous, but the shift should not lead to moisture problems. New knowledge about timber and wooden constructions is required in order to better meet these criteria. The purpose of this thesis has been to examine moisture levels in timber and external wooden walls during the construction and usage phases, as well as provide recommendations for good moisture safety. The work is based on seven publications, listed in chronological order from the construction process, and covers timber stacks at sawmills, factory production of wall elements and roof trusses, transportation to the building site, assembly, as well as follow-up of finished houses and structures in the usage stage. Mainly three methods, field test, calculation and laboratory test, have been used for evaluation of moisture levels, temperature and mould growth. The overall conclusion is that dry wooden structures and timber is required, which means that several minor adjustments need to be made to the construction practices, construction methods, products, materials, designs and structures currently being used, in order to achieve good moisture safety. In southern Sweden, there is a significant risk for mould growth on wooden studs in well-insulated north-facing external walls that lack external thermal insulation outside the wooden studs. In northern Sweden this risk is significantly lower or there is no risk at all. A small amount of rain that does not create running or dripping water on timber materials and which can dry out the same day should not lead to a risk of mould growth. In general, however, precipitation and material exposed to rain pose a high risk of mould growth. There is a risk of mould growth on timber surfaces that are exposed to an outdoor air in southern Sweden for more than a month, but not at all in the mountain areas or northernmost Sweden. There also appears to be a major gap between product manufacturers, engineers and constructors with regard to ensuring overall functionality. For example, a large amount of products are not produced and tested to co-function or as part of a multi-component system in order to achieve an overall function, which means that not even the correct preconditions are generally available on the market in order to construct and assemble moisture safe.

Nyckelord: moisture, driving rain, precipitation, mold, mould growth, hysteresis, wood, timber, wall, façade, wind barrier, weather barrier, MRD-index, measurement, field test, laboratory test

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2014-04-24. Senast ändrad 2014-05-12.
CPL Pubid: 197075


Läs direkt!

Lokal fulltext (fritt tillgänglig)

Institutioner (Chalmers)

Institutionen för bygg- och miljöteknik


Building Futures
Annan teknik

Chalmers infrastruktur


Datum: 2014-05-13
Tid: 10:10
Lokal: Seminarierum 2004, Sven Hultins gata 8, Chalmers
Opponent: Prof. Stig Geving, Department of Civil and Transport Engineering, NTNU, Trondheim, Norge

Ingår i serie

Lic - Department of Civil and Environmental Engineering, Chalmers University of Technology