CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Characterization of Surface Defects on Pulse-Electrodeposited Nickel Tubes

Charakterisierung von Oberflächenfehlern

Uta Klement (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik) ; Yiming Yao (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik) ; Seyedeh Nooshin Mortazavi (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik) ; Glenn Hibbard
Praktische metallographie (0032-678X). Vol. 50 (2013), 12, p. 789-798.
[Artikel, övrig populärvetenskap]

Electroplated thin-walled tubes were tested in compression. Most cracks were found at defects, i.e. protrusions on the surface of the tubes. The study focusses on the characterization of these defects. Optical microscopy revealed that the defects were already present in the metallization layer and occurred during the metallization process. When electrodepositing a Nickel coating on top, grains grow perpendicular to the surface of the metallization layer creating local orientation changes. Thus, protrusions occur on the surface of the tube where imperfections are located in the metallization layer. The results will be valuable for improving the deformation characteristics of the electrodeposited tubes; they can also be used to design new types of electrodeposits by patterning the substrate.

Nyckelord: Nanomaterial, electroplating, defects, metallization, EBSD, Nickel coating, protrusions

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2013-12-12. Senast ändrad 2016-07-05.
CPL Pubid: 189030


Läs direkt!

Länk till annan sajt (kan kräva inloggning)