CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

A study of the surface integrity after machining by means of non-destructive testing methods

Eric Tam (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik) ; Seyed Hosseini B. (Institutionen för material- och tillverkningsteknik) ; Jonas Holmberg ; Per Lundin ; Lars Mattsson ; Lars Nyborg (Institutionen för material- och tillverkningsteknik)
Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies Vol. 2 (2013), p. 283-292.
[Konferensbidrag, refereegranskat]

During metal machining, depending on the cutting conditions, surface and subsurface microstructure alteration are occasionally observed. These alternations are normally referred as “white” and “dark” layers. Due to their different mechanical properties in comparison to the unaffected material, they will have an impact on the finished part. Controlling the quality of the machined parts regarding the surface microstructure alteration by means of non-destructive testing (NDT) methods would be beneficial from production point of view. In this study, the surface integrity of AISI 52100 steel machined at different cutting conditions resulting in white and dark layers with different characteristics were studied. Surface topography, microstructure and residual stresses were examined by using light scattering, optical microscopy and x-ray diffraction (XRD) techniques. Whilst surface characterization was emphasized, one NDT method – magnetic Barkhausen noise (BN) technique – is not well defined for this purpose. The correlation between all the applied techniques was therefore investigated and a preliminary model was developed for the influence of surface roughness, stress conditions and white and dark layer thicknesses on BN signal.

Nyckelord: machining; white layer; light scattering; x-ray diffraction; Barkhausen noise

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2013-10-28. Senast ändrad 2016-10-18.
CPL Pubid: 185772


Institutioner (Chalmers)

Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik (2005-2017)
Institutionen för material- och tillverkningsteknik (2005-2017)


Hållbar utveckling
Innovation och entreprenörskap (nyttiggörande)

Chalmers infrastruktur