CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Control of delubrication process for PM components based on prealloyed steel powders

Eduard Hryha (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik) ; Seshendra Karamchedu (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik) ; Lars Nyborg (Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik)
Proceedings of the 2012 Powder Metallurgy World Congress & Exhibition, Powder Metallurgy Association and Japan Society of Powder and Powder Metallurgy,2013 (2012)
[Konferensbidrag, refereegranskat]

Reliable in-situ monitoring system for the on-line control of the processing parameters during delubrication of PM steel compacts is presented. The monitoring system is build utilizing sensors (dew-point, CO2 and O2) commonly used in industry. Delubrication of PM steel compacts, based on Cr-alloyed steel powder, was monitored in a number of process gases (inert, reducing and oxygen containing atmospheres) of the different purity (wet and dry gases). Effects of temperature, holding time, heating rate, flow rate and component density were studied. Optimum conditions for efficient delubrication with minimum effect on PM compact properties at lowest processing cost were established. Based on the specimens analysis and gas monitoring profiles in the case of ethylenbisstearamide-based lubricants it is recommended to perform delubrication with low heating rate at temperature around 450°C in nitrogen atmosphere in order to facilitate efficient delubrication and avoid surface oxide during sintering. Rather low flow rate is needed – enough to provide even weak dynamic gas conditions around every component surface.

Nyckelord: EBS-based lubricant, delubrication, sintering atmosphere, processing atmosphere control

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2013-10-11. Senast ändrad 2013-12-03.
CPL Pubid: 185107


Institutioner (Chalmers)

Institutionen för material- och tillverkningsteknik, Yt- och mikrostrukturteknik (2005-2017)


Metallurgisk process- och produktionsteknik

Chalmers infrastruktur

Relaterade publikationer

Denna publikation ingår i:

Critical Aspects of Delubrication and Sintering of Chromium-alloyed Powder Metallurgy Steels