CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Use of VSC-HVDC for industrial systems having onsite generation with frequency control

C. Q. Du ; E. Agneholm ; Gustaf Olsson (Institutionen för energi och miljö, Elteknik)
IEEE Transactions on Power Delivery (0885-8977). Vol. 23 (2008), 4, p. 2233-2240.
[Artikel, refereegranskad vetenskaplig]

This paper presents a voltage-source-converter (VSC)-FfVDC-supplied industrial system with onsite generation where the VSC-HVDC and generator are taking part in the voltage and frequency control. The reason for using a frequency controller in the converter is to increase the ridethrough capability of the VSC-HVDC-supplied industrial system by exploiting the inertia energy of rotating masses in case of voltage disturbances. The investigation is performed using the PSCAD/EMTDC program and the dynamic performance of the system is evaluated during grid faults and load changes. Three comparisons are done to analyze the system response when the inverter uses different frequency-control strategies, the impact on the system when the turbine operates in different modes, and the VSC-HVDC's ability to mitigate voltage dips from the grid. Simulation results show that the use of a VSC-HVDC for feeding industrial plants can mitigate voltage dips in the grid. Different frequency-control strategies have different responses on the system. The best frequency response is achieved when the turbine is also equipped with a frequency controller.

Nyckelord: current limit, frequency controllers, onsite generation, voltage dips, voltage-source converter (VSC)-HVDC, design

Denna post skapades 2013-06-11.
CPL Pubid: 178275


Läs direkt!

Länk till annan sajt (kan kräva inloggning)

Institutioner (Chalmers)

Institutionen för energi och miljö, Elteknik (2005-2017)


Elektroteknik och elektronik

Chalmers infrastruktur