CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

A comparison of two wave models and their influence on fatigue damage in ship structures

Wengang Mao (Institutionen för sjöfart och marin teknik, Marine Design) ; Fredhi Agung Prasetyo ; Jonas Ringsberg (Institutionen för sjöfart och marin teknik, Marine Design) ; Naoki Osawa
Proceedings of the ASME Thirty-second International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2013) in Nantes, France, June 9-13, 2013 Vol. 2 A (2013),
[Konferensbidrag, refereegranskat]

In the maritime industry, fatigue failure is one of the most significant failure modes for ship structures. The fatigue damage in ship structures is mainly caused by the variation of wave loadings applied on ships, leading to variable structural stresses. Therefore, a reliable description of wave environments encountered during a ship’s service life is essential for accurate fatigue assessment of ship structures. Besides the wave scatter diagram provided by classification society rules, different statistical wave models have also been built up to model wave environments along arbitrary ship routes. The wave models could provide more specific wave environment for any chosen sailing routes of an individual ship. They may have the potential to be used for some practical applications, such as conceptual ship fatigue design, remaining fatigue life prediction when a ship plans to change its original trade region, and crack maintenance planning etc. Since the development of these models may be based on different sources, e.g. satellite measurements, hindcast data, buoys, etc., the reliability and consistence of wave generations from various wave models must be validated by the measured wave environments in order to be used for those practical applications. In this paper, waves generated from two different wave models, one based on hindcast data and one mainly on satellite data, are compared with measured wave environments encountered by a 2800 TEU container vessel on the North Atlantic route. These wave models are used in the calculation of the fatigue damage in the vessel. The results obtained using waves generated from the two wave models are compared with the fatigue damage calculated based on strain measurements in the ship. Recommendations for future development of the wave models and further investigation to make the applications more realistic for ship fatigue assessment are also presented.

Nyckelord: ship structure, spatio-temporal wave model, storm modelling, stress-based fatigue, full-scale measurement

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2013-06-10. Senast ändrad 2014-02-27.
CPL Pubid: 178189


Läs direkt!

Länk till annan sajt (kan kräva inloggning)

Institutioner (Chalmers)

Institutionen för sjöfart och marin teknik, Marine Design (2012-2014)


Hållbar utveckling
Teknisk mekanik
Tillförlitlighets- och kvalitetsteknik

Chalmers infrastruktur