CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Hydromechanical Behaviour of Fractures Close to Tunnels in Crystalline Rock

Hydromekaniskt beteende hos sprickor nära tunnlar i kristallint berg

Johan Thörn (Institutionen för bygg- och miljöteknik, Geologi och geoteknik)
Göteborg : Chalmers University of Technology, 2013. - 65 s.

The deformation and stiffness properties of rock fractures are important measurable parameters when describing their hydromechanical behaviour. Deformation refers to aperture change. Stiffness refers to the amount of deformation per stress change to which a fracture is subjected. This thesis aims to investigate the stiffness and deformation behaviour of fractures in crystalline rock through in situ and laboratory experiments. The focus in this work is on fracture geometry due to geological stress history. This will result in increased conceptual understanding and accordance between hydromechanical and geomechanical fracture description and behaviour. The in situ measurements consisted of deformation measurements in boreholes and were conducted at the Äspö Hard Rock Laboratory (HRL) and in the Hallandsås Tunnel. The total deformation across the instrumented borehole sections was measured as an effect of hydraulic pressurisation of the fractures in the nearby rock volume. The results were assessed in terms of deformation and fracture stiffness. The laboratory experiments were conducted as cyclically loaded permeameter measurements of fractured rock core samples from Äspö HRL with simultaneous deformation measurements across the fracture. The tested samples had various geological properties and revealed differences in hydraulic aperture and mechanical deformation behaviour across the experimental cycles. The stiffness to hydraulic aperture relationship followed a trend identified in the literature and deviations were given plausible explanations related to the geology and geometry of the samples. The results were discussed in the light of the sampled geology and the measurement methods. The measured deformations and corresponding stiffness were found to be reasonable in the light of available knowledge of the local geology and stress situation at the sites.

Nyckelord: Hydromechanical coupling, Fracture stiffness, Deformation measurement, Äspö HRL, Hallandsås, Geological history, In situ, Laboratory experiments, Fracture geometry, Rock stress

Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2013-05-02. Senast ändrad 2014-11-27.
CPL Pubid: 176396


Läs direkt!

Lokal fulltext (fritt tillgänglig)

Institutioner (Chalmers)

Institutionen för bygg- och miljöteknik, Geologi och geoteknik (2005-2017)


Building Futures
Geovetenskap och miljövetenskap

Chalmers infrastruktur

Relaterade publikationer

Inkluderade delarbeten:

Fracture Deformation Measurements during Grouting in Hard Rock

Hydromechanical characterization of fractures close to a tunnel opening: A case study

Hydraulic and Hydromechanical Laboratory Testing of Large Crystalline Rock Cores

Denna publikation ingår i:

The Impact of Fracture Geometry on the Hydromechanical Behaviour of Crystalline Rock


Datum: 2013-05-31
Tid: 10:00
Lokal: VH
Opponent: Docent Sven Follin, SF GeoLogic

Ingår i serie

Lic - Department of Civil and Environmental Engineering, Chalmers University of Technology 2013:5