CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE COOLING AIR FLOW IN AN ELECTRIC GENERATOR

Pirooz Moradnia (Institutionen för tillämpad mekanik, Strömningslära) ; Valery Chernoray (Institutionen för tillämpad mekanik, Strömningslära) ; Håkan Nilsson (Institutionen för tillämpad mekanik, Strömningslära)
HEFAT2011, 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics p. 242-249. (2011)
[Konferensbidrag, refereegranskat]

The cooling air flow in a small-scale electric generator has been investigated experimentally and numerically, and the results have been compared to each other. The studies have been made in cold conditions, without heat transfer. The velocity profiles at the inlet of the generator have been measured by means of a 5-hole probe, traversed in the axial direction to give the axial distribution of the radial velocities at the inlet of the generator. The outlet velocity distribution has been measured by means of a total-pressure rake, consisting of a number of total pressure probes, which gives the horizontal distribution of the velocity magnitudes, aligned with the stator channels at the outlet of the generator. Smoke visualization of the flow has been performed at the inlet of the generator and the flow pattern has been visualized. The numerical study has been performed using the OpenFOAM open source CFD software. The corresponding numerical velocity profiles at the inlet and the outlet of the generator have been extracted and compared with the experimental profiles. The velocity vectors at the inlet of the generator have been compared to the flow pattern obtained by the smoke visualization. Because of geometrical dissimilarities between the experimental rig and the numerical computational domain, there are unavoidable differences in the results. This yields a qualitative comparison, although the comparisons still show a relatively good quantitative agreement between the experiments and the numerical simulations. (Note: Figure 13 and its description updated)

Nyckelord: Generator cooling, Numerical analyis, Experimental measurements, Heat transfer, OpenFOAM


Figure 13 and its description in the text have been updated after the proceedings.



Den här publikationen ingår i följande styrkeområden:

Läs mer om Chalmers styrkeområden  

Denna post skapades 2011-08-29. Senast ändrad 2014-09-29.
CPL Pubid: 145247

 

Läs direkt!

Lokal fulltext (fritt tillgänglig)

Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Strömningslära

Ämnesområden

Energi
Mekanisk energiteknik
Strömningsmekanik

Chalmers infrastruktur

Relaterade publikationer

Denna publikation ingår i:


Prediction of Cooling Air Flow in Electric Generators