CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Embedded water-based surface heating, Part 1: Hybrid three-dimensional numerical model

Henrik Karlsson (Institutionen för bygg- och miljöteknik, Byggnadsteknologi)
Journal of Building Physics (1744-2591). Vol. 33 (2010), 4, p. 357-392.
[Artikel, refereegranskad vetenskaplig]

A numerical simulation tool that assesses the transient operation of embedded water based surface heating systems is developed. Embedded surface heating systems and especially floor heating systems are, by far, the most common heat supply system in newly built residential buildings in e.g. Scandinavia and central Europe. The thermal system operation is influenced by the transient interaction between embedded elements, zones, construction elements, systems, gains and weather. Thus, an integrated modelling principle, based on the International Building Physics Toolbox in Simulink©, is applied where the embedded surface heating model is represented by a module. The integrated tool is suitable for thermal system analysis of whole buildings. In particular, the embedded surface heating model simultaneously calculates the transient heat conduction that occurs within the embedded element, based on the finite control volume method, and the fluid temperature decline based on a local quasi steady state assumption. The numerical model, which represents a section plane of the embedded construction, is verified against a commercial two-dimensional heat transfer software in the case of a typical floor heating application.

Nyckelord: Embedded surface heating, floor heating, dynamic modelling, low temperature heating, and Simulink modelling.



Denna post skapades 2010-04-16. Senast ändrad 2013-10-29.
CPL Pubid: 119887

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för bygg- och miljöteknik, Byggnadsteknologi

Ämnesområden

Samhällsbyggnadsteknik

Chalmers infrastruktur