CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Acceptance criterion for rail roughness level spectrum based on assessment of rolling contact fatigue and rolling noise

Jens C. O. Nielsen (Institutionen för tillämpad mekanik, Dynamik) ; Anders Ekberg (Institutionen för tillämpad mekanik, Material- och beräkningsmekanik)
Proceedings of the 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems Vol. 2 (2009), p. 409-418.
[Konferensbidrag, refereegranskat]

The influences of train speed and rail roughness level on rolling noise and subsurface initiated rolling contact fatigue (RCF) impact are studied. In particular, the consequences of short-pitch rail corrugation on tangent track with wavelengths in the interval 3 – 8 cm are simulated using models of dynamic vehicle–track interaction. Based on the calculated results, a criterion in terms of a limit for maximum levels of rail roughness can be determined. Such a criterion may be useful for planning of rail grinding intervals if used together with a system for regular monitoring of rail roughness levels. It is concluded that the importance of controlling rail roughness increases with increasing train speed. Increasing axle loads on freight vehicles from 22.5 tonnes to 30 tonnes leads to a significant increase in RCF impact. In operational practice, this is usually compensated for by introducing more conformal wheel–rail profile combinations. Calculated vertical wheel–rail contact forces and rolling noise levels show good agreement with field measurements

Denna post skapades 2010-01-14. Senast ändrad 2014-09-17.
CPL Pubid: 107323


Institutioner (Chalmers)

Institutionen för tillämpad mekanik, Dynamik (1900-2017)
Institutionen för tillämpad mekanik, Material- och beräkningsmekanik (2005-2017)



Chalmers infrastruktur