CPL - Chalmers Publication Library
| Utbildning | Forskning | Styrkeområden | Om Chalmers | In English In English Ej inloggad.

Influence of heat conductivity on the performance of RTV SIR coatings with different fillers

K. Siderakis ; D. Agoris ; Stanislaw Gubanski (Institutionen för material- och tillverkningsteknik, Högspänningsteknik)
Journal of Physics D: Applied Physics (00223727 ). Vol. 38 (2005), 19, p. 3682-3689.
[Artikel, refereegranskad vetenskaplig]

Room temperature vulcanized silicone rubber (RTV SIR) coatings are employed in order to improve the pollution performance of high voltage ceramic insulators by imparting surface hydrophobicity. In this paper, the performance of three RTV SIR coatings containing different fillers is investigated in a salt-fog test. Alumina trihydrate (ATH) and silica are the fillers included in the formulation, aiming to increase the material endurance to the energy supplied by the surface electrical activity during periods of hydrophobicity loss. The primary action of these fillers is to increase the material heat conductivity, i.e. the amount of energy conducted to the substrate. In addition, in the case of ATH relief is also achieved due to particle decomposition. The results indicate that for the compositions commercially available, where low amounts of fillers are used, and under the conditions of the test, ATH filled coatings performed better than the silica filled ones. This is attributed to ATH decomposition which further relieves the material structure and therefore decelerates material aging.



Denna post skapades 2010-01-12.
CPL Pubid: 106481

 

Läs direkt!


Länk till annan sajt (kan kräva inloggning)


Institutioner (Chalmers)

Institutionen för material- och tillverkningsteknik, Högspänningsteknik

Ämnesområden

Elkraftteknik

Chalmers infrastruktur