Investigation of hard-to-filter materials -Relating local filtration properties to particle interaction
Licentiatavhandling, 2010

Filtration as a means of separating solids from liquids is an important unit operation employed in a range of different industrial sectors, e.g. forest products, mineral, chemical process and pharmaceutical industries to name but a few. Accurate and applicable models for the filtration unit operation are imperative if industrial filtration equipment is to be designed correctly. Easy-to-filter, incompressible or near-incompressible materials can currently be modelled satisfactorily, thereby facilitating scale-up and design. There is, however, a lack of good models for compressible cakes that are formed by hard-to-filter materials. Efforts attempting to model filtration have often been based on average filtration properties; although providing certain information regarding filtration, this approach is inferior to that of using models based on local data. Models for filtration often contain lumped parameters, i.e. the classical filtration equation describes the filtration properties of particles using the average specific filtration resistance parameter. An alternative would be to base their filtration properties on the interactions experienced during filtration. Important interactions that should be considered between particles include surface forces, material bridges between particles and interlocking. This work investigates hard-to-filter materials. Two materials are used. A model material, titanium dioxide, is used to investigate the effects of particle interactions on filtration behaviour. Although all of the interactions mentioned above may be of interest, depending on the filtration situation, this thesis focuses on electrostatic interactions. The separation of green liquor, a process that is of great interest in the pulp and paper industry, is also investigated. Green liquor dregs form hard-to-filter, compressible cakes. As far as titanium dioxide is concerned, local filtration properties are investigated for different particle interactions. The inter-particle interactions are changed by controlling the ζ-potential. Both local solidosity and pressure are measured, and a local specific filtration resistance calculated from this data. It could be concluded that the compressibility of the filtration cake is changed substantially by altering the ζ-potential. Several published constitutive relationships for filtration are applied; they yield very similar parameters that are in good accordance to the characterization of the material.

Constitutive relationships

Cake filtration

Particle interactions

Modelling

Local filtration properties

Solid-liquid separation

KC-salen, Kemigården 4, Chalmers

Författare

Tuve Mattsson

Chalmers, Kemi- och bioteknik, Skogsindustriell kemiteknik

Ämneskategorier

Pappers-, massa- och fiberteknik

Övrig annan teknik

Licentiatuppsatser vid Institutionen för kemi- och bioteknik, Chalmers tekniska högskola: 2010:8

KC-salen, Kemigården 4, Chalmers

Mer information

Skapat

2017-10-08